Are you a 9-year-old kid and interested in identifying your Ford 9 inch rear end? Don’t worry, because we have got you covered! In this blog post, we will provide you with a step-by-step guide on how to identify your Ford 9 inch rear end.
Table of Contents
Step 1: Check the Axle Tag
The first step you should take is to check the axle tag. This tag is usually located near the differential cover. The tag will have several numbers that indicate the width and ratio of the rear end. If the tag says “9 inch” then you have a Ford 9 inch rear end. You can also look for an “F” on the tag, which indicates that it is a Ford rear end.
Step 2: Measure the Pinion Gear
The second step to take is to measure the pinion gear. The pinion gear is located at the center of the differential. To measure the pinion gear, you will need to use a caliper. The caliper should measure the gear’s diameter and its depth. If the measurements are both 9 inches, then you can be sure that it is a Ford 9 inch rear end.
Step 3: Check the Axle Bearing
The third step is to check the axle bearing. You can check the axle bearing by removing the axle from the differential. The axle bearing will be located between the differential and the axle. The bearing should have a diameter of 9 inches, and it should be marked with an “F” for Ford. This is another indication that you have a Ford 9 inch rear end.
Step 4: Count the Teeth on the Ring Gear
The fourth step is to count the teeth on the ring gear. The ring gear is located around the outside of the differential. To count the teeth, you will need to use a gear tooth counter. If the gear has 41 teeth, then you can be sure that it is a Ford 9 inch rear end.
Step 5: Look for the Ford Logo
The fifth step is to look for the Ford logo. The logo is usually printed on the differential cover. If you see the Ford logo, then you can be sure that it is a Ford 9 inch rear end.
And That’s It!
That’s it! Now you know how to identify your Ford 9 inch rear end. Next time you are looking for a rear end, you will know exactly what to look for. Just remember: check the axle tag, measure the pinion gear, check the axle bearing, count the teeth on the ring gear, and look for the Ford logo.
Bonus Tip: Sing Along!
Here’s a fun tip: as you are going through the steps, why not sing along? To help you, here’s a song to sing:
“Check the axle tag and measure the pinion gear,
Check the axle bearing and count the teeth on the ring,
Look for the Ford logo and you’ll know it’s clear,
Identifying your Ford 9 inch rear end!”
With this guide, you can now easily identify your Ford 9 inch rear end. So what are you waiting for? Get out there and have some fun!