How To Fix The Clock On A Honda Civic 2009?

How to Change the Clock in a Honda Civic It Still Runs
How to Change the Clock in a Honda Civic It Still Runs from itstillruns.com

Some things in life are easy to fix, like when your shoes are untied, simply tie them up! But when it comes to fixing a clock on a Honda Civic 2009, things can get a little more tricky. If you’re stuck trying to figure out how to fix your clock, don’t fear, we’re here to help!

Step 1: Gather the Necessary Supplies

The first step towards fixing your Honda Civic 2009’s clock is to gather the supplies you’ll need. These include a Phillips head screwdriver, a flat head screwdriver, a 10mm socket and ratchet, and a 10mm open-end wrench. Make sure you have all of these supplies ready before you begin.

A Tip:

If you don’t have a ratchet set, you can use a pair of pliers or a pair of adjustable wrenches to loosen the bolts.

Step 2: Remove the Clock

Once you have your supplies ready, you’ll want to start by removing the clock from the dashboard. To do this, you’ll first need to use the Phillips head screwdriver to remove the two screws at the bottom of the clock. Once you’ve removed the screws, you’ll need to use the flat head screwdriver to pry the clock off the dashboard.

Step 3: Replace the Clock

Once the clock has been removed, you’ll need to replace it. To do this, you’ll need to first use the 10mm socket and ratchet to remove the four bolts on the back of the clock. Once you’ve removed the bolts, you’ll need to use the 10mm open-end wrench to remove the two nuts. Once the nuts have been removed, you’ll be able to slide the clock off.

Step 4: Install the New Clock

Once the old clock has been removed, it’s time to install the new one. To do this, you’ll need to first use the 10mm socket and ratchet to install the four bolts on the back of the clock. Once the bolts are in place, you’ll need to use the 10mm open-end wrench to install the two nuts. Once the nuts have been installed, you’ll be able to slide the clock into place.

Step 5: Test the Clock

Once the clock has been installed, you’ll want to test it to make sure it’s working properly. To do this, you’ll need to turn the key in the ignition and wait for the clock to start. If the clock is running, then you’ve successfully fixed it! If not, you may need to repeat the steps above.

Conclusion

Fixing the clock on a Honda Civic 2009 isn’t as hard as it sounds! With the right tools and a little bit of know-how, you can have your clock running in no time. So, don’t let your clock slow you down, get out there and fix it! Now it’s time to “set it and forget it” like the song says, and you’ll be off and running in no time.

Leave a Comment