Table of Contents
Introduction
Are you an owner of a 96 Honda Accord and dealing with a faulty speedometer? Don’t worry, you are not alone. Many people face this similar problem and it can be fixed with some easy steps. Fixing a faulty speedometer on your 96 Honda Accord is a lot easier than you think. This blog post will tell you all the steps you need to take to get your speedometer working in no time. So, let’s get started!
Tools Needed
Before getting started, you need to have some tools handy. This makes the process of fixing the speedometer much easier. Here is a list of tools that you’ll need:
- Socket Wrench
- Screwdriver
- Pliers
- Wire Cutters
- A 12V Battery
Step 1: Disconnect the Battery
Before you start, make sure to disconnect the battery of your 96 Honda Accord. To do that, you’ll need to use a socket wrench to loosen the negative terminal of the battery. Once you’ve disconnected the battery, you can move on to the next step.
Step 2: Access the Speedometer Cable
Now you need to access the speedometer cable. You can find the speedometer cable underneath the dashboard of your car. After you’ve found it, you’ll need to use a screwdriver to remove the screws that are holding the cable in place. Once you’ve removed the screws, you can move on to the next step.
Step 3: Remove the Cable
Now it’s time to remove the cable from the car. To do that, you’ll need to use a pair of pliers to disconnect the cable from the speedometer. Once you’ve removed the cable, you can move on to the next step.
Step 4: Replace the Cable
Now you need to replace the old cable with a new one. To do this, you’ll need to use a wire cutter to cut off the old cable and replace it with a new one. Once you’ve replaced the cable, you can move on to the next step.
Step 5: Test the Speedometer
Now it’s time to test the speedometer and see if it’s working. To do this, you’ll need to connect a 12V battery to the speedometer. If the speedometer is working, the needle should move when the battery is connected. If the needle doesn’t move, then you may need to replace the speedometer.
Conclusion
Fixing a 96 Honda Accord speedometer can be done in just a few steps. All you need to do is have the right tools and follow the steps above. Once you’ve done that, you can have your speedometer working in no time. So, what are you waiting for? Get out there and get your speedometer fixed! “Don’t wait to fix it when you can just do it, make your speedometer just like new”.